Technical Parameters
SONL 222-522 TSO 222 TSO 222 A ECO 222-522 22222 E KM 22 MB 22 FRB 9/200Associated products
Housing Seal kit for a through shaft Seal kit for a shaft end End cover Bearing Lock nut Lock washer Locating ring 
Dimensions
| da | 110 mm | Shaft diameter |
|---|---|---|
| Ca | 71 mm | Width of bearing seat |
| Da | 200 mm | Diameter of bearing seat |
| A | 213 mm | Width |
| A1 | 145 mm | Foot width |
| A2 | 163 mm | Distance housing centreline to oil level gauge side face |
| AA | 221 mm | Width for shaft end arrangement |
| AB | 229 mm | Width for through shaft arrangement |
| d1 | 120 mm | Outside diameter of seal |
| B1 | 88 mm | Width of seal |
| s2 | 32.5 mm | Distance shaft end to end cover |
| H | 290 mm | Height |
| H0 | 343 mm | Height including eye bolt |
| H1 | 160 mm | Centre height of bearing seat |
| H2 | 50 mm | Foot height |
| J | 347 mm | Distance between attachment bolts |
| J1 | 75 mm | Distance between attachment bolts |
| L | 420 mm | Length |
| N | 32 mm | Length of attachment bolt hole |
| N1 | 26 mm | Width of attachment bolt hole |
| S | 114.5 mm | Distance bearing centreline to seal end face |
| r | 1.6 mm | Radius of shaft fillet |
| ba | 52 mm | Distance bearing centre line to shaft end |
|---|---|---|
| bb | 167 mm | Distance shaft end to seal side face |
| bc | 138 mm | Width of shaft seat |
| db | 108 mm | Shaft diameter |
| dc | min.118 mm | Shaft diameter |
| Ga | M 110x2 | Thread size on shaft end |
| Gb | 28 mm | Thread length on shaft end |
| J6 | 370 mm | Distance between dowel pins |
|---|---|---|
| N4 | max.8 mm | Diameter of dowel pins |
| PG | G 3/8 | Size of tapped oil inlet hole in housing cap |
|---|---|---|
| P1 | 55 mm | Distance housing centre line to oil inlet, housing cap |
| P2 | 53 mm | Distance housing centre line to oil inlet, housing cap |
| RG | G 3/4 | Size of tapped oil outlet hole in housing base |
| R1 | 162 mm | Distance between oil outlets in housing base |
| R2 | 23 mm | Height of oil outlet position |
| O1 | 98 mm | Height housing bottom to oil level gauge top |
| O2 | 163 mm | Distance housing centre line to oil level gauge end |
1 260 kN 500 kN 350 kN 320 kN 420 kN 170 kN 440 kN 250 kN 220 kN M 12x90 80 N·m 24 mm 665 N·m M 12 53 mm 0.6 l 77 mm 0.9 l
Breaking loads, housing
P55° Breaking load P90° Breaking load P120° Breaking load P150° Breaking load P180° Breaking load Pa Breaking load 
Yield point, cap bolts
Q120° Load carrying ability of cap bolts Q150° Load carrying ability of cap bolts Q180° Load carrying ability of cap bolts Mounting information
Size of cap bolt Recommended tightening torque for cap bolts Recommended diameter for attachment bolts G Recommended tightening torque for attachment bolts Size of eye bolt Oil level Oil fill Oil level Oil fill
Our factory
Warehouse
Warehouse
Warehouse
Warehouse
Products Description
The combination of SKF housings, bearings and accessories is an excellent choice for a customized, reliable and sustainable solution for your shaft arrangement. SKF has a wide range of high-quality housing designs and sizes to meet your specific challenge – including specially designed housings for special applications. The bearings reflect SKF’s state-of-the-art technology, providing the highest-quality bearings. You need to buy each part in the combination separately.
Many variants
Customized combinations
Cost-efficient
Reliable
Sustainable
