Technical Parameters
12 mm 24 mm 6 mm ≈16 mm ≈21.4 mm min.0.3 mm P6 min.14 mm max.15.8 mm max.22 mm max.0.3 mm 2.91 kN 1.46 kN 0.062 kN 67 000 r/min 32 000 r/min 0.02 14.5 7 µm 9 µm P6 General bearing specifications Tolerances: Normal (metric), P6, P5, Normal (inch) Radial internal clearance: Classes C2 to C5 Bearing interfaces Seat tolerances for standard conditions Tolerances and resultant fits
Dimensions
d Bore diameter tΔdmp -0.007 – 0 mm Deviation limits of mid-range bore diameter D Outside diameter tΔDmp -0.008 – 0 mm Deviation limits of mid-range outside diameter B Width tΔBs -0.12 – 0 mm Deviation limits of ring width d1 Shoulder diameter D2 Recess diameter r1,2 Chamfer dimension ISO tolerance class for dimensions 
Abutment dimensions
da Diameter of shaft abutment da Diameter of shaft abutment Da Diameter of housing abutment ra Radius of shaft or housing fillet Calculation data
Basic dynamic load rating C Basic static load rating C0 Fatigue load limit Pu Reference speed Limiting speed Minimum load factor kr Calculation factor f0 Tolerances of run-out
Range of section height at inner ring of assembled bearing tKia Range of section height at outer ring of assembled bearing tKea ISO tolerance class for geometrical tolerances Tolerances and clearances
Our factory
Warehouse
Warehouse
Warehouse
Warehouse
Products Description
Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
Integral sealing prolongs bearing service life
Simple, versatile and robust design
Low friction and high-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
